HOLPOSON? Ironing Free

HOLPOSON? Ironing Free 樹脂是纖維素纖維及其混紡織物洗可穿免燙整理的無甲醛整理劑，主要應用于以襯衫、職業(yè)裝、帽子為主的服裝面料的防皺整理，賦予面料良好的防皺免燙性能，穿著時不受拘束，不易起皺，手感柔軟。

一、物化性能

外 觀 白色粘稠液

溶解性 以任意比例稀釋溶于冷水中

配伍性 可與大多數(shù)整理助劑混用,與其它助劑混用前，建議先試驗。

二、使用方法

浸軋?zhí)幚硪话阌昧繛椋?/span>

HOLPOSON? Ironing Free 40～ 160g/L

軋液率 70 ％

一浸一軋 → 烘干(110℃×1～3 分鐘) → 定型(150-160℃×1～2 分鐘)

產品性能

1. 整理后的衣物有良好的防皺免燙效果，提高織物的折皺回復能力；

2. 整理后的織物手感柔軟；

3. 整理后的織物有很好的耐水洗效果。

注意事項

1. 整理前的織物應保持潔凈，沒有雜質，使織物有較好的吸濕性；

2. 由于樹脂反應需要在酸性催化條件下, 建議將被整理的織物布面的pH調整至中性范圍內，不可使布面偏堿性；

3. 處理樹脂前請根據(jù)工廠的設備及其它條件，進行必要的試驗。以防影響織物的強力及色光；

4. 化料時用溫水（約 30- 40℃），可保證產品良好的加工穩(wěn)定性和持久效果。

貯 存

HOLPOSON? Ironing Free 包裝：25KG、60KG的塑料桶，貯存期為 12 個月。 室內存放，避免高溫、嚴寒。

Formaldehyde-Free and Ironing-Free Resin

HOLPOSON? Ironing Free

Ironing Free resin is a formaldehyde-free finishing agent for wash-and-wear and ironing-free treatment of cellulosic fiber and its blends. It is mainly used for anti-creasing finishing of apparel materials mainly including shirts, business wear and hats. It gives the fabric good anti-creasing and ironing-free functions. When being worn, materials are unstretched, creaseless and soft.

Physical & chemical properties:

Appearance: White viscous liquid

Solubility: Soluble in cold water in any proportion

Compatibility: Mixable with most finishing agents

It’s recommended to test in advance before mixing with other auxiliaries.

Usage:

The general dosage in padding treatment: Ironing Free general concentration is 40-160g/L

Liquid retention rate: 70%

Dip and roll once → drying (110 ℃× 1-3min) → heat setting (150 ℃× 1-2min)

Characteristics:

1. Treated apparels have good antiwrinkling and wash-and-wear effect

2. Treated textiles are soft

3. Treated textiles have good wash durability.

Attentions:

Before finishing, the fabric should be kept clean and free of impurities, so that the fabric has good moisture absorption;

Because the resin reaction needs to be catalyzed by acid, it is suggested to adjust the pH value of the fabric surface to neutral. The textile surface cannot be alkaline.

Before resin treatment, please carry out necessary tests according to the workshop equipment and other conditions in case of affecting the strength and color of textiles.

Dissolving with warm water (about 30-40 ℃) can ensure good stability in the process and good lasting effect.

Storage:

1. Package: 25 or 60Kg/plastic