關于水泥檢查井模具的詳細介紹是為了滿足對于水泥檢查井不同樣式、尺寸的生產要求，從水泥檢查

井模具的全部知識里面，可以很好的看到其鋼板使用如何、模具整體外形結構、內外模分塊數量等等

，這些是構成整套檢查井模具的基本組成要素。不管是水泥檢查井還是其他類型的檢查井，情況都是

如此。關于水泥檢查井模具的詳細介紹是按照模板的構成以及使用而言，因?yàn)樗鄼z查井模具目前的

定制量非常大，水泥檢查井的制作除了依靠預制完成外，還有的需要直接在現場進行混凝土的澆筑作

業。

The detailed introduction of the cement inspection well mold is to meet the production

requirements for different styles and sizes of the cement inspection well. From all the

knowledge of the cement inspection well mold, you can see how to use the steel plate, the

overall shape structure of the mold, the number of blocks of the internal and external

mold, etc. These are the basic elements of the whole inspection well mold. This is true

for both cement manholes and other types of manholes. The detailed introduction of the

cement inspection well mould is based on the composition and use of the formwork. Because

the cement inspection well mould is currently customized greatly, the production of the

cement inspection well not only depends on prefabrication, but also needs to directly

carry out concrete pouring on site.

水泥檢查井模具是專門生產水泥檢查井的模板，這種模板的構成全部使用鋼板焊接的方式，每天模板

的重量依據不同規格大小而不同，所以模板的價格也是所有區分。在水泥檢查井鋼模具的生產中，要

注意采取何種拆模方式，過去統一使用拔模的方法，但是這種拆模方式很容易造成內模的損害，而且

長時間下去容易造成模具變形。現在統一采用的拆卸形式是內模分塊，外模分塊的結構，這樣拼接在

一起使用螺絲緊固，可以有效的提高模具使用率。

The cement inspection well mold is a special template for the production of cement

inspection well. The composition of this template is all welded by steel plate. The

weight of the template varies according to different specifications every day, so the

price of the template is also differentiated. In the production of steel molds for cement

inspection wells, attention should be paid to the mode of formwork removal. In the past,

the method of formwork drawing was used uniformly, but this mode of formwork removal is

easy to cause damage to the internal formwork, and it is easy to cause mold deformation

for a long time. At present, the unified disassembly form is the structure of internal

mold block and external mold block. In this way, they are spliced together and fastened

with screws, which can effectively improve the utilization rate of the mold.